UTP101AR

UTP101AR is an active video receiver  for one channel, used in CCTV networks with UTP cable transmission. Amplification level can be determined by using a
DIP switch. Works in conjunction with passive balun sites (900m) but also with the active ones. Paired with UTP101AT, transmission distance can reach up to 1200m. Has 2 video outputs.

FEATURES

Power: 12-40Vcc / 9-24Vca
Transmission: PAL, NTSC, SECAM - in real time, excellent quality
Transmission distance: up to 1200m
One input, two outputs
Magnification adjustment DIP switch
Lightning protection
Interference and ESD protection
Metal case, rack or wall mounting

SPECIFICATIONS

Video Input: 1 channel
Video Output: 2 channels
Transmission distance: 0-600m (with passive balun) 0-1200m (with active balun)
Supply voltage: 12V or 9V-24Vca 40Vcc
Power consumption: <1W
Coaxial Video Port: BNC-F
UTP Port: Port fix, 5 screws
System Compatibility: PAL, NTSC, SECAM
Bandwidth: 0 ~ 6MHz
Anti-interference> 75dB
Adjustment mode: DIP 4 bits
DIP Type: Manual
Power LED: Red
Signal LED: Yellow
Overvoltage protection on power: 2KV/1KA Per: IEC6 04/05/1000
Surge protection on coax: 2kV Per: IEC6 04/05/1000
Overvoltage protection on UTP cable: 2 kV (differential) 4kV (common) Per: IEC6 04/05/1000
ESD:   level 1 contact discharge level 3
            1b  air discharge level 3
             Per: IEC6 04/02/1000
Operating temperature: 0 ~ 55C
Storage Temperature: -20 ~ 70C
Humidity (non-condensing) 0 ~ 95%
Size: 115mm × 82mm × 22mm
Case: Steel
Color: Silver
Net Weight: 180g
The average duration of use:> 20000 hours